江西赣州天通污水处理设备分类说明

江西赣州天通污水处理设备分类说明
普通污水处理设备和污水处理设备是一种有效处理城市污水、工业设备、工业废水、污水和避免污染物直接进入水体，改善生态环境，提高城市品位，对促进经济发展具有重要意义。目前，污水水质标准不同，污水处理工艺也很多。由于标准不同，使用的设备也不尽相同，今天我将介绍常用的污水处理设备及其各种功能。

1，气浮机应用范围：     
 a、分离地表水中细小悬浮物，藻类等微聚体。     b、回收工业废水中有用物质，如造纸废水中纸浆等。     c、代替二沉池分离和浓缩水中污泥等悬浮物。
2,曝气机（曝气头）是由潜水泵、射流器、散流器、吸气管和软管五部分组成。
3，微滤机占地面积小，生产能力大（250-36000m3/d），操作管理方便，已成功地应用于给水及废水处理。
4，离心机主要用于将悬浮液中的固体颗粒与液体分开或将乳浊液中两种密度不同，又互不相溶的液体分开。
5，污泥脱水机特点是可自动控制运行,连续生产,无级调速,对多种污泥适用,适用于给水排水,造纸,铸造,皮革,纺织,化工,食品等多种行业的污泥脱水。

废水处理程度的分单眼和初级处理、二级处理和三级处理主要使用初级处理的污水中呈悬浮状态的固体物理学、用法。一次处理后废水BOD去除率只有20%，仍然进行排放，2级处理二级处理的主要任务是大幅去除污水中呈胶体状态和溶解**物，BOD去除率为80%至90%。通常二级处理污水才能达到排放标准，经常活性污泥法和生物膜处理方法三级处理目的。更有些特殊污染物的例子，除氟，除磷等深度处理常规化学法污水工程港口型喷涂。

要求1，现有初级处理工艺处理效果的强化改造改造，根据实际情况，充分利用现有的处理设施，现有的医院中应用多草的化粪池，接触结构及运行方式进行改造，必要时增设的一部分设施的效果，为提高处理医院污水处理排放标准。

1, the application range of air floatation machine:
A, separation of fine suspended particles in surface water, algae and other micropolymers. B, recycling industrial waste water useful material, such as pulp and paper pulp and so on. C, seperating and concentrating sludge such as sludge in water instead of two sink pool.
2, the aerator (aerator) is composed of five parts, a submersible pump, a jet, a diffuser, a suction pipe and a hose.
3, the microfilter has a small area, large production capacity (250-36000m3/d), convenient operation and management, and has been successfully applied to the treatment of water and wastewater.
4, centrifuge is mainly used for the solid particles and liquid suspension separation or emulsion of two different densities, but also separation of immiscible liquids.
5, the characteristics of sludge dewatering machine are automatic control operation, continuous production, stepless speed regulation, and suitable for many kinds of sludge. It is suitable for sludge dewatering in many industries such as water supply and drainage, paper making, casting, leather, textile, chemical industry, food and so on.

The degree of wastewater treatment is divided into monocular and primary treatment, two stage treatment and three stage treatment. The solid state physics and usage of suspended solids are mainly used in primary treated sewage. After one treatment, the BOD removal rate of wastewater is only 20%, which is still discharged. The main task of the 2 stage treatment two stage treatment is to remove colloidal state and dissolved organic matter in sewage, and the BOD removal rate is 80% to 90%. Usually two levels of sewage treatment can meet the emission standards, regular activated sludge process and biofilm treatment for three grade treatment purposes. There are some examples of special pollutants, such as fluoride, phosphorus removal and other deep treatment of conventional chemical sewage engineering port type spraying.

1, strengthen the transformation of the existing primary treatment process, according to the actual situation, make full use of existing treatment facilities, application of grass existing hospital in the septic tank, the contact structure and operation mode of transformation, when necessary, adding a part of the facility effect, in order to improve the treatment of hospital sewage treatment discharge standards.